Activate Additional Tables

ACTIVE_SAT

This constant is used to activate the additional tables (satellites) /KERN/IPPSAT01 to /KERN/IPPSAT99.

Enter a 99-digit combination of the numbers 0 (= inactive) and 1 (= active) in column Value from for activation. This combination defines the satellite that is meant (in the sequence above).  

The combination 000110000000000000… thus means that the additional tables /KERN/IPPSAT04 and /KERN/IPPSAT05 are set active.

NOTE: The satellite needs to be activated twice: first, all used satellites must be set active in the * constants. This activation is required for alignment with the license model. Second, satellites that are used in the respective planning layout must be activated in the constants of the planning layout. The satellite assistant in the program menu can also be helpful with activating the satellites.

In the field Value to, a 99-digit combination of signs L, P or – indicates if the tables that are active in field Value from shall be only read (L), planned (P) or both read and planned. If no entry is made, the activated tables are both being read and planned.

Combination ---LP------------ thus means that the additional table /KERN/IPPSAT04 is only read and table /KERN/IPPSAT05 is only planned.